Why Linksys WRT54G Default Passwords Won’t Work?
Do you own a LinksysWRT54G WiFi router? Are you trying to log in to its admin panel using the admin password? Do you find it hard to log in to the admin panel as the Linksys WRT54G default passwords arenot working? Well, we can help you understand why you are stuck with this issue. We will also help you by providing you with the best possible solutions that will fix the issue.Let us tell you that even if you own any other router model by Linksys, the same fixes can be relied upon. Now, let’s get started without any further delay.
What are Linksys WRT54G Default Passwords?
When you purchase a Linksys router, it runs on the default values like the default SSID, admin password and WiFi password. You use the Linksys WRT54G default passwords to complete the initial setup. During or after the setup, you can change the default values.
There are two passwords, one is the Linksys admin password that you use to log in to the admin panel. The default value for this password is admin.
The second one is the WiFi password. You use this password to connect to the router’s WiFi network. There is no default value assigned to it. You must assign a value to it during the setup process.
Linksys WRT54G Default Password Not Working: Fixed
Now that you are unable to use the default value of the password to access the router admin page, here is what you should do:
Use the Password With No Error
Make sure that you are entering the password value in the correct field and are making no typing mistakes while inserting it. Cross-check the entrée before clicking on the Log In button. Besides, check that the Caps Lock key on the keyboard is not enabled. Since the password is case sensitive, enabling the Caps Lock key will type a completely wrong password that won’t work.
Have You Changed the Default Password of WRT54G?
If the Linksys router default password is not letting you log in then one of the reasons is that the default password is updated. Maybe you or someone else has changed the default password of your Linksys router but now you are using the default value to go past the Linksys router login page. We suggest you use the updated password to access the Linksys router admin portal.
If you are still stuck with the default password not working issue then see ahead what you should do next.
Reset your Linksys WRT54G Router Password
Resetting the router to the default settings is suggested if the default password is not working as you have updated the password. But since you do not remember the updated password, resetting is the only option you are left with. By resetting the router, the current customized settings get back to the default ones.
Now, reset your router using the steps given below:
- Power up the Linksys WRT54G router first.
- Ensure that it is fully booted up.
- Now, press the Reset button on it and hold it for 10 seconds.
Your router is now reset and the password is reset to the default value.
Do This Now!
1. Reconfigure Linksys WiFi Router
You should now set up your Linksys router once again as it is reset to the factory settings. Connect it to the modem using a LAN cable first. Next, connect your computer to its network. Use the IP 192.168.1.1 to go to the router’s setup page and follow the prompts.
2. Change WRT54G Default Password
After you have set up the Linksys router, it is recommended you update the default values of the admin password. Use these steps:
- Log in to your router using IP.
- Go to Administrations > Management Tab.
- Under Password, enter the new password value twice.
- Click on the Save button once you are done.
In the End
If the Linksys WRT54G default passwords are not working for you, then you can use the steps discussed in this blog post. Now that you have a new password assigned to your Linksys router, make sure that you note is down somewhere safe so that you can refer to it in case you forget it.
