Linksys Smart WiFi Setup Wizard- For Linksys Router Setup

Linksys Smart WiFi setup wizard is software that helps to set up Linksys Smart routers easily. Use the instructions provided on this page to know how you can set up your Linksys Smart router using the smart setup wizard.

What You Need for Linksys Smart Router Setup?

• Linksys smart WiFi router
• Stable internet connection
• RJ-45 cable/s
• PC with a compatible browser installed

How to Set Up Router Using Linksys Smart WiFi Setup Wizard?

• Turn off your modem for some time.
• Begin by connecting the devices. Take an Ethernet (RJ-45) cable and insert one of its ends into the LAN port of the modem and the other end into the Internet port of the Linksys router.
• Power up your modem now.
• Connect any external antennas if available to the router and plug its power adapter into a wall socket and switch it on.
• Now, connect your computer to the router’s network.

Important Note: You can check the Linksys smart WiFi router’s SSID and password in the Quick Start Guide or at the bottom of your router.

• Load an internet browser. Ensure using a compatible web browser that is updated to the latest version.
• In the URL bar, type linksyssmartwifi.com carefully and Hit Enter.
• Linksys smart WiFi setup wizard will launch.
• Agree to the Terms and Conditions and click Next.

• You can choose to use the setup wizard to assist you in the setup process or bypass the setup wizard and do it all manually and click Next.
• A new window Updates for your router will open up. You can select Auto updates or manual updates.
• Assign the router WiFi name and password and click Next. You can choose to have the same name for all WiFi bands.
• The internet connection will be temporarily disconnected now. It is now time that you connect to your router’s network using the new WiFi name and password.
• Create an admin password for your Linksys router and click Next.

This completes Linksys router setup using the Linksys smart WiFi setup wizard.

Can’t Set Up Linksys Router using Smart Setup Wizard?

If you are facing issues while setting up your Linksys router, then use the tips given ahead:

1. Check Connectivity

• The router must be securely connected to the modem. Examine the Ethernet cable for any damages. Be certain that it is securely inserted into the right ports on both devices.
• It is important that your computer must be connected to the router’s network. You wouldn’t land on the Linksys Smart WiFi setup wizard unless you have connected your computer to the router’s network.
• If you are not able to connect to Linksys router’s WiFi, then use an Ethernet cable to connect the router and computer.

2. Ensure Uninterrupted Power Supply

• Both the router and modem must be receiving a consistent power supply.
• Examine the power sockets and the power cables properly.
• Use a UPS if required.

3. Reboot the Router

• Rebooting will be helpful if you can not set up your router.
• Power off your router after disconnecting it from the modem.
• Let it sit idle for some time.
• Reconnect the router and modem.
• Turn on the router now.

4. Reset your Router

Resetting will be the last remedy when all other hacks fails to fix the setup problem. Here is how you can reset your Linksys router:

• Take out the Ethernet cable from both devices, the router and modem.
• Ensure that the router is powered up properly before resetting it. Consider plugging it into a power socket if it is switched off.
• Find the Reset hole on your router and press it gently using a paper clip. Hold it for a minimum of 10 seconds.
• Release it and your router is reset to the factory settings.

Now, try to set up your Linksys router once again using the Linksys Smart WiFi setup wizard. Ensure using the correct instructions as given above to avoid any issues.