Why is My Linksys Node Not Connecting to Modem?
Linksys Velop system is becoming a favorite of tech lovers. Those who wish to get WiFi signals in their whole home; prefer installing a mesh WiFi system. Linksys Velop is one of the best mesh systems available today. Linksys Velop consists of two or more devices known as nodes that after configuration are placed in different parts of the home to get WiFi signals. The main node connects to the modem and the secondary nodes connect to the main node.
Is the Linksys node not connecting to modem? Are you not getting WiFi signals due to this? Since you’ve landed on the right post, you will get solutions that will effectively help you connect your node to the modem. Let’s begin!
Linksys Node Not Connecting to Modem: Here’s the Fix
Are you trying to set up your Linksys mesh system? During the initial setup, you connect the main node to the modem so that it can get its input signals. If you are facing issues while connecting the main node and modem, read ahead to learn what has gone wrong.
Is the Main Node Running on Factory Defaults?
While connecting the node to the modem for the first time, it should be running on the factory default settings. If there are some settings on it and then these may be preventing the connection from happening and hence you are facing Linksys node not connecting to modem issue.
Reset your node now and ensure you have the default settings running on it so that you can easily connect it to the modem. Press and hold the Reset button located on the node to reset it. Connect the devices, access Linksys router login page and complete the setup.
Why Don’t You Try Power Cycle Process?
Power cycling gives a fresh start to the devices on the network. This also eradicates technical glitches from the devices. But what exactly a power cycle process is? Power down the Linksys node and the modem for some time. Take out their power cables from the respective sockets. Wait for some time now. Plug in and power on the devices. The sequence should be: turn on the modem first and then the node. Is the Linksys node not connecting to modem even now?
Place them in Proximity
There are high chances that the Linksys main node is placed out of range of the modem and hence they can’t communicate. This will definitely put you in the pit of issues like the one you are in right now. Unplug the node from its current location and plug it somewhere closer to the modem now. Let them connect now.
Using a LAN Cable will be Helpful
There are two ways you can get your Linksys node connected to the modem. One is the wireless connection and the second is using a LAN cable. Wireless connections are not reliable as the chances of signal disconnections are higher. We suggest you make a wired connection between the Linksys node and modem now.
Are You Already Using LAN Connection?
Have you connected the Linksys main node to the modem with the help of a LAN cable but are still facing issues with the connection? Why don’t you verify a few points now? Read ahead what exactly are we talking about.
- Ensure that you are using a cable that is in good condition.
- The cable must be inserted into the correct ports.
- The ports in use must not be damaged.
- The cable shouldn’t be loose.
We suggest you take out the LAN cable from both devices once. Now clean the ports on the modem as well as the main node and once again make the connection. See to it that the connection that you make is finger-tight.
The Closing Thoughts
So these are the topmost fixes that will help you resolve Linksys node not connecting to modem issue. We are anticipating that you have successfully connected the main node to the modem and have completed the setup process using the solutions presented in this very blog. It is now time you enjoy lag-free internet connection on the client devices in your home.
