Unable to Join WiFi Network of Linksys Extender? Let’s Fix!

• join wifi network
• Mitchell Hope
• April 6, 2022

Accessing a blazing-fast internet connection remains a dream for people who are unable to join WiFi network of their Linksys extenders. Are you also struggling with the same predicament? If you are nodding your head in yes, then we’ve got your back. Here, we will reveal some tested and proven tips to get the issue fixed with ease. So, let’s get started.

Fixed: Can’t Join WiFi Network of Linksys Extender

Use the Correct WiFi Password

The first and foremost reason that might be preventing you from joining the network of your Linksys extender is the use of the incorrect WiFi password. Know that the WiFi password of your Linksys range extender is the most crucial element to connect to its network. Therefore, it must be entered correctly.

Consider not making typing errors while entering the WiFi password and cross-check it before hitting the Connect button on your wireless client device.

Connect to the Correct Network

If using the correct WiFi password does not bear any fruit, then chances are that you are trying to connect your client device to the incorrect network. It might happen when two WiFi networks have the same name. So, you need to be very careful while connecting your client device to the WiFi network of your Linksys range extender.

Also, assign a different and unique WiFi name to your Linksys range extender so that you won’t face any difficulties finding it on the network list. Once done, check whether you are able to join WiFi network of your Linksys extender or not.

Reboot Your Client Device

Sometimes, technical glitches with your client device might also prevent you from connecting it to the Linksys extender’s WiFi network. The best method to get rid of technical glitches is rebooting the device.

So, without any delay, give a fresh start to your wireless client device and then try to join WiFi network of the extender. If you are still running out of luck, consider getting in touch with our experts or walking through the next troubleshooting hack.

Remove Signal Interference

Signal interference is another reason that might create hurdles in joining the WiFi network of the Linksys extender. Perhaps, your Linksys extender is lying beneath a table or inside a cupboard due to which it is not transmitting WiFi signals properly. So, before the situation worsens, relocate your extender.

Remember that you will only be able to join WiFi network of the extender if no signal interference is there. Therefore, keep your Linksys extender away from devices emitting radio-wave frequencies, reflexive surfaces, metal objects, and thick concrete walls. Also, do not keep the extender near objects containing a large amount of water. For the better transmission of WiFi signals, place the extender in the central location of a well-ventilated room.

Check for Viruses

Everyone knows how harmful viruses are to networking devices. Chances are that the client device you are using to join WiFi network of your Linksys range extender is infected with viruses.

Before you run out of time, it is suggested to eliminate viruses using an antivirus software.

Bring Extender Close to Router

The distance between your Linksys extender and the home router plays a major role in WiFi performance. Know that you will be able to join WiFi network effortlessly if the distance between the devices is safe. The term ‘safe distance’ here means ‘neither too far nor too close’.

Just in case you love using wires, then ensure that the Ethernet cable you’ve used to connect your WiFi devices is free of damage. If not, then consider replacing it with a new one.

Reset your Extender

If every effort made by you has been wasted, then there are high chances that you’ve improperly installed your extender. Therefore, consider setting up your Linksys extender properly. However, it can’t be done without resetting it.

To reset your extender, press the Reset button on your extender using a sharp object and let it get restored to the factory default mode. Once done, reconfigure it from scratch by accessing extender.linksys.

Final Thoughts

By following the tips discussed above, you will surely get success in connecting your wireless client devices to the Linksys extender’s network. However, if you are still struggling to join WiFi network of the extender, reach out to our experts.