A Quick Guide to Do Linksys Bridge Mode Setup
- Linksys bridge mode
- Mitchell Hope
- July 27, 2022
By default, the Bridge mode on your Linksys router is disabled. But, enabling it is pretty easy. However, before you enable Linksys bridge mode, we would recommend you first learn about it. Usually, enabling the Linksys bridge mode means you get to use two different routers simultaneously.
Before we dig into the matter, you should know that bridge mode disables traditional Network Access Translation (NAT). However, you get additional port access for your devices. Let’s move further to know the basic requirements for the process. Read on.
Linksys Bridge Mode Requirements
The commencement of the Linksys bridge mode can only happen if you have the following things.
- You must have a main router. In many cases, the router or modem given out by the Internet Service Provider serves as the main router.
- Internet connection.
- To connect the routers, you must have two to three Ethernet cables.
- You also need to have a Linksys router with Bridge mode compatibility.
The question arises – why you should activate the Linksys bridge mode function? What are the reasons compelling you to do so? Is it going to deliver some different results? Let’s explore the answers in points given below.
Why do Linksys Bridge Mode Setup?
People usually enable this mode for different reasons. A few of them are given below.
- When you have two different routers, to share the network between two different routers, you can enable this mode.
- To set the Linksys router as an access point.
- You can enable this mode if you wish to stay connected to the ISP router for better internet connectivity.
- Furthermore, to get rid of third-party devices to function with your router, Linksys Bridge mode activation can help.
We now have the basic requirements along with the reasons for the activation of this mode. Let us now learn about the right process to enable it. Keep reading.
Linksys Bridge Mode Setup Process
Turn on Router
Choose a perfectly working wall switch to power on your Linksys router. Make sure you avoid even a single chance of fluctuation. Otherwise, your connected devices can easily get damaged. The power adapter of your router should fit tightly into the switchboard.
If the device fails to turn on, don’t forget to hit the start switch on your router. If needed, you should change the chosen wall socket.
Access Default IP
Open a computer/laptop for the second step of activating Linksys Bridge mode. Launch an internet browser and move your mouse cursor to the address bar. Click on the given fields to enter the default IP address. Make sure you minimize the errors while entering the IP.
Furthermore, you must ensure that the chosen web browser is updated and compatible with your browser. These are crucial to avoid any further issues.
Perform Router Login
For router login, you will need a username and password. Moreover, the need to avoid mistakes while entering the login credentials is high. So, turn off the Caps Lock key when you enter the login details. Make sure you type in the correct username and passphrase.
After that, if you want, you can enable ‘remember my credentials’. Hit the OK button to do the login.
Enable Bridge Mode
When you get access to the Linksys extender setup wizard, move to the Setup window. You get access to the Linksys Bridge Mode option under the Setup option. When you enable it, you get the following options under the Network Setup heading.
- Internet IPv4 Address
- Subnet Mask
- Default Getaway
- Device Name
You should enter the required details before moving further.
Connect Two Routers
Get hold of the Ethernet cable that you have. It will be used to connect the main router to the Linksys Bridge mode router. Make sure the cable used is not loose on both ends. Otherwise, you can’t get the most out of the Linksys Bridge mode setup.
As you can see, enabling Linksys Bridge mode is easy. You can get through the process mentioned above. Therefore, you must keep every little detail in check to strengthen the connections during the bridge mode setup.
After the setup, you get access to a strong wireless network. Hence, you can access the network for a perfect internet experience. In case you need additional help, don’t hesitate to contact our technical experts.
You might also like:-
How to Resolve Linksys Error 2123 – Easy Fixes
Can’t Connect to My Linksys Extender Settings? How to Fix?
Topmost Tips and Tricks to Boost Linksys Extender Weak Signal
Informative Guide to Solve Linksys Extender No Internet Issue
Unable to Join WiFi Network of Linksys Extender? Let’s Fix!
Linksys Site Survey Feature: Everything You Should Know
Want to Run Linksys Speed Test? Let’s Help!
Fix Common Issues with Linksys AC1200 WiFi Range Extender
Linksys Access Point Setup: Guide for Beginners
Guide to Set Up Linksys Range Extender in Access Point Mode
- 5 Ghz WiFi not showing up
- How To Setup
- join wifi network
- Linksys ac1200 wifi range extender
- Linksys Access Point Setup
- Linksys bridge mode
- Linksys extender
- linksys extender no internet
- linksys extender setup
- Linksys range extender
- Linksys Router
- linksys site survey
- Linksys Speed Test
- Linksys Velop Setup
- Model Specific Issues
- New Linksys Range Extender
- password not working
- Routerlogin Net
- Troubleshooting Tips
- WiFi Extender