How Can I Factory Reset Linksys Velop?
There comes a time when you need a new start. So can happen with your Linksys Velop as well. Your Linksys device may often need a fresh beginning. This usually happens if you get poor signals from it. Or maybe you are experiencing an issue that is not getting fixed despite trying all the possible solutions. In such a situation, you may need to factory reset Linksys Velop to give it a new beginning. If you are looking for information on how to reset your Linksys Velop then this guide will assist you in implementing the reset process on your device.
How to Reset Linksys Velop?
There are two ways to factory reset Linksys Velop. One way involves getting access to the Linksys extender login page and going to the settings to reset it. The second way is all about pressing one single button and getting the job at hand accomplished.
The two ways are:
1. Manual Reset
2. Soft Reset
We have mentioned both methods in detail below. You can use any of them as per your choice. But the software methods can be used only when you are able to access the login page of Velop device. In case logging in is not possible then you need to opt the manual method.
Factory Reset Linksys Velop via Manual Reset
Here are the steps that you need to use to reset your Linksys Velop and restore the factory settings on it:
- Power up the Velop by connecting it to an active wall socket.
- Turn on the power button on the device.
- Find the Reset button on the Velop now.
- Push it gently.
- Your device will be reset to the factory settings now.
Factory Reset Linksys Velop via Software Reset
Below given are the steps to factory reset Linksys Velop device using the software reset method:
Step 1: Turn On Linksys Velop
First things first, your Linksys Velop extender should be powered up. So, connect it to an active wall socket to apply power to it. Once the power LED on it turns stable, you can proceed to the next step.
Step 2: Connect it to Modem
You need to now connect the Velop to the modem. Thus, grab hold of an Ethernet cable and make a solid and secure connetion between the two devices. Although the devices can also be connected wirelessly, using a cable is suggested as this way there are fewer chances of disconnections.
Step 3: Visit Linksys Velop Login Page
You can proceed further and use a laptop or computer and fire up an internet browser on it. Type the login web address or the default IP address of the Linksys Velop in the address bar of the browser. Hitting the Enter key on the keyboard will take you to the login page.
FYI, you can also use the Linksys app on your smartphone to access the login page of the Velop device.
Step 4: Access Admin Dashboard
On the login page, you need to insert the admin login credentials and click on the Login button. You will then be navigated to the Linksys Velop admin dashboard.
Step 5: Reset the Velop Device
Once you are logged in and access the Linksys Velop admin dashboard, you will need to go to the settings. Click on Troubleshooting under Router Settings. Here locate Diagnostics tab and click on it. Under the Factory reset option, click on the Reset link. Confirm to reset your device by clicking on Yes. Linksys Velop mesh system will be reset to factory settings.
What’s Next?
After you have reset your Linksys Velop WiFi mesh system, the default factory settings get restored on it and the current settings get erased. After this, you need to set it up again from the very beginning. Use the user manual that came along with the device at the time of purchase to learn about the setup process.
The Closing Note
Here comes an end to our informative blog meant to help you on how to factory reset Linksys Velop. We are sure you are successfully done resetting and again setting up your Linksys device. You will now be able to access seamless internet on it in all parts of your home.