5 Tips to Fix Linksys Extender Password Not Working Issue
Linksys range extenders have changed the equation of the digital world. After setting up a Linksys extender in the house, a user need not worry about dead zones. The reason being, it facilitates the user to access a lag-free internet connection throughout every corner of the house. In order to change the settings of the Linksys extender, the user needs to log in to it. And, Linksys extender login is not possible without the admin password. But, it becomes painful when the Linksys extender password stops working. If you’re also troubled by the same problem, give a read to this post and learn how to fix the Linksys extender password not working issue in a matter of minutes. So, let’s get started.
Fixed: Linksys Extender Password Not Working
Reboot Your Extender
It might look like a little effort. But, believe us! Rebooting is one of the easiest and most versatile hacks to resolve numerous issues related to Linksys range extenders. Before you doubt the worthiness of rebooting, let us tell you that it helps your extender to get rid of technical glitches. And, who knows it will bring you luck in resolving the Linksys extender password not working issue?
Now, know the correct method of rebooting your Linksys range extender with the help of the guidelines outlined below:
-
Disconnect all client devices connected to your Linksys extender.
-
Once done, switch off the extender.
-
Wait for some time.
-
Thereafter, unplug the Linksys device from the wall socket.
-
Now, re-plug the extender into the wall outlet.
-
Switch on the extender.
-
Reconnect your client devices to the extender’s network.
After rebooting the extender, check whether the Linksys extender’s password starts working for you or not. If you are still running out of luck, read the next hack.
Check the Internet Connection
Another reason that might have led you to the Linksys extender password not working issue might be a poor internet connection. Well, the poor internet connection can occur in two scenarios. Firstly, when there is an improper connection between WiFi devices. Secondly, if there is a problem from the end of your ISP. Before you contact your ISP, make sure that things are fine from your end.
So, check the distance between your Linksys extender and router. Are they placed at a safe distance? No? This is where you’ve lagged. So, consider keeping your WiFi devices at a safe distance. In case of a wired connection, ensure that the Ethernet cable is non-damaged. However, don’t wait to ping your ISP if nothing is wrong at your end.
Cross-Check the Password
This is because a lot of users act irresponsibly while entering the Linksys extender password during the login process. Perhaps, you are in the same boat. You should know that the default password of your Linksys range extender is case-sensitive. It means a typo and you’ll face the Linksys extender password not working issue. Therefore, be careful while entering the extender password.
Also, if you have ever changed the Linksys extender password in the past, use it to log in to your WiFi device. Else, the issue will continue to trouble you.
Update the Web Browser
You can use any web browser to log in to your Linksys range extender. But, using an updated web browser is strongly recommended. The reason being, the outdated version of the web browser fails to load the Linksys login page properly leading you to the Linksys extender password not working issue.
But, updating the web browser won’t resolve the issue if it is cached. Therefore, consider clearing unnecessary files from the web browser by navigating to its Settings menu.
Reset and Reconfigure
Ah! It looks like the extender is still giving you a hard time. Therefore, the time has arrived that you opt for the factory default reset process. After executing the reset process, your extender will return to the factory default mode and no longer run on the current settings. But, the good news is, it will fix the issue you are facing as well as allow you to perform Linksys extender setup from scratch.
The customized settings from your Linksys extender can be erased by pushing the Reset button. So, find the Reset button on the extender and press it using a pointed object. Your extender will now operate on the factory default mode. Now, you can set it up from scratch and tweak its settings.
The Conclusion
And with that, we’ve reached the end of the list of tips to fix the Linksys extender password not working issue. Hopefully, the hacks we’ve discussed will help you get rid of the problem. Just in case they won’t, reach out to our experts. There’s no issue related to Linksys extenders that they can’t fix.
