How to Fix Linksys WiFi Extender – General Troubleshooting
Being an outperforming networking device never means that no issue can affect its ability to work efficiently. With that said Linksys WiFi range extenders are also vulnerable to various issues that can be addressed easily if a few things are taken care of. Which factors affect the home network performance and how to fix Linksys WiFi extender issues? You will become familiar with the same in this post. So, get down to the reading this instant.
Which Factors Affect Linksys Extender Efficiency?
1. The Placement
No matter for which extender model you have completed the Linksys extender setup process, it won’t be able to facilitate you with a smoother WiFi experience if the chosen location is improper. To be specific, the extender won’t be able to work properly if it is placed in a congested space or in an area that suffers WiFi interference.
WiFi interference is a term given to a phenomenon where the signals emitted by a networking device get diverted from their actual paths. The worst scenario occurs when signals get completely blocked.
2. The Distance from the Router
It is a well-known fact that a range extender draws off WiFi signals from the router and then transforms (amplifies) them to change the destiny of internet dead zones. Therefore, to learn how to fix Linksys WiFi extender issues, you must be well aware of the background of this signal transmission process that completely depends on the extender-router distance.
The distance between the Linksys WiFi extender and router decides the rate at which your devices will communicate. The lesser the distance between your devices, the smoother the signal transmission.
3. The Firmware Version
The firmware version on which a device in the technical realm works matters a lot. If your device keeps running on an older i.e. an outdated firmware version, then you cannot expect it to work efficiently. It is because when the device operates on an outdated firmware version, it automatically starts lacking the latest features and functionalities.
The lack of the latest firmware version also results in decreased security of the range extender. In other words, your device, here, the Linksys range extender becomes incapable of competing with its contemporaries.
So, these are some of the factors that can affect the performance of your Linksys WiFi range extender. Considering that you have gone through them carefully, we are assuming that you are all set to learn how to fix Linksys WiFi extender issues. For this, you need to make your way to the next section.
How to Fix Linksys WiFi Extender Issues?
Before jumping to the solutions, you are suggested to power cycle the range extender so that the troubleshooting process will have a longer effect. We also advise you to power cycle the home network on a regular basis as it helps in keeping technical glitches away. For your information, these glitches tend to affect your home network’s performance at a rate more than you expect. But, for now, let’s focus on troubleshooting solutions:
1. Look for a Better Location
If your Linksys extender rests in a location full of WiFi interference, you can relocate it to get better outputs. The chosen space is supposed to be free of microwave ovens, televisions, refrigerators, treadmills, aquariums, mirrors, glasses, metal objects, etc. The reason being, in one way or another, these things are likely to affect the signal propagation process.
2. Bring the Extender Close to the Router
If your range extender is placed too far from the router, then you should bring these devices a little closer. This act will allow both devices to communicate effectively. But, there’s a little catch here. You cannot place these devices very close. If you do so, their WiFi signals are likely to get involved in a clash. We’re sure that you do not want that!
3. Update the Firmware
The cons of making your WiFi extender run on an outdated firmware version have been highlighted above. It indirectly rounds up the importance of equipping the extender with the latest firmware version. So, what are you waiting for? Get the latest firmware version installed on your extender as soon as possible. But, make sure that it matches the model number of the extender you own.
In the Final Analysis
Now, it is time to put an end to our post explaining how to fix Linksys WiFi extender issues. We expect that you are now completely aware that changing the location, updating the firmware, and reducing the extender-router distance can work in your favor. So, resume your online experience and take it to new heights!